Operating Modes Of The Data Logger (Logger Type) - Endress+Hauser Liquiline To Go Ex CYM291 Operating Instructions Manual

Data Logger

Operating Modes of the Data Logger (Logger Type)

Manual logging when logger is activated (SHOT)
In this mode, a measured value is recorded when the
Measurement
Logger activated
The measured value is saved to the address of the last recorded value + 1
Manual logging when logger is deactivated
Measurement
Logger deactivated
Measured value is maintained
Proposed address blinks
(address of the last recorded
value + 1)
Measured value is saved to the desired address (e.g., for overwriting an incorrect
measurement).
Interval (INT)
In this mode, the measured values are cyclically recorded.
Measured parameter
= entry
If desired: Select start address
using st.
Example: Logger type "INT"
pH Oxy Cond
key is pressed.
33
Time