Error And Status Messages - Endress+Hauser Liquiline To Go Ex CYM291 Operating Instructions Manual

Error and Status Messages

Error messages are indicated as "ERROR ..." on the display. Information on the sensor
condition is indicated by the "Sensoface" icon (friendly, neutral, sad) possibly accom-
panied by an info message ("INFO ...").
Example of an error message:
ERROR 1 (value out of range)
Sensoface (the "smiley" icon) provides
information on the sensor condition (main-
tenance request). Measurement can still be
performed. After a calibration, the corre-
sponding Sensoface icon (friendly, neutral,
sad) is shown together with the calibration
data. Otherwise, Sensoface is only visible in
measuring mode.
The most important error messages and
"Sensoface" info messages are shown on
the inside of the protective cover.
A complete list of messages and their
meanings is provided in the following
tables.
pH
Example of a "Sensoface" message:
INFO 1 (cal timer expired)
41
Oxy Cond