Table of Contents
Advertisement
SuperServer E403-9D-4C/8CN/12C/14C/14CN/16C-FN13TP User's Manual
Mounting on a Surface
The CSE-E403iF can be mounted directly on a surface using the mounting brackets and
mounting screws or nails. The following procedure describes how to mount the system to a
sturdy surface. Use screws or nails of sufficient strength to support the weight of the system.
Mounting the Chassis
1. Attach the three mounting brackets to the chassis using the ten M4xL4 screws that
came with the system. See the figure below. The mounting bracket along the I/O panel
is pre-attached.
Figure 2-16. Installing the Mounting Brackets
38
Advertisement
Table of Contents
