Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X13SET-PT User Manual

Super X13SET-PT User's Manual

2.3 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.

Tools Needed

Phillips Screwdriver (1)

Location of Mounting Holes

Note 1: To avoid damaging the motherboard and its components, do not use a force
greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips Screws (8)
UID-SW
JUIDB1 UID_LED1
BMC_LAN
PRESS FIT
VGA
JSTBY1
JSTBY1: 5 V STBY POWER
MH9
MH2
JIPMB1 FAN3
SXB3
LAN2 LAN1
X710
BMC
MH7
JBT1
CPLD
PCH
JSD2
C741
MH10
JTPM1
JTPM1: TPM/PORT80
SATA6
CPU
SXB1
MAC CODE
X13SET-PT
REV:1.00
BAR CODE
DESIGNED IN USA
BIOS LICENSE
IPMI CODE
BT1
MH3
BATTERY
34
Standoffs (8)
(Only if Needed)
JNCSI1
MH1
JRK1
SXB4
MH6
M2_1_LED1
M.2-C1
M2_2_LED1
M.2-C2
FAN4
MH5