Table of Contents
Advertisement
Use this feature to select the number of rows and columns used in Console Redirection
for legacy OS support. The options are 80x24 and 80x25.
Putty KeyPad
This feature selects Function Keys and KeyPad settings for Putty, which is a terminal
emulator designed for the Windows OS. The options are VT100, LINUX, XTERMR6, SCO,
ESCN, and VT400.
Redirection After BIOS POST
Use this feature to enable or disable legacy console redirection after BIOS POST. When
set to BootLoader, legacy console redirection is disabled before booting the OS. When set
to Always Enable, legacy console redirection remains enabled when booting the OS. The
options are Always Enable and BootLoader.
Legacy Console Redirection
Redirection COM Port
Use this feature to select a COM port to display redirection of Legacy OS and Legacy OPROM
messages. The options are COM1 and SOL/COM2.
Serial Port for Out-of-Band Management/Windows Emergency
Management Services (EMS)
This submenu allows you to configure Console Redirection settings to support Out-of-Band
Serial Port management.
Console Redirection
Select Enabled to use a COM port selected by the user for EMS Console Redirection. The
options are Disabled and Enabled.
*If the feature above is set to Enabled, the following features are available for
configuration:
Console Redirection Settings
This feature allows you to specify how the host computer will exchange data with the client
computer, which is the remote computer used by the user.
Out-of-Band Mgmt Port
89
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
