Table of Contents
Advertisement
Installing the Air Shroud
The air shroud directs airflow from two of the fans to the center of the motherboard.
1. If you are installing expansion cards that require power from the power supply, you must
cut a hole to route the power cable from the power supply to the expansion module.
2. Place the air shroud over the CPU and align the wide-end of the air shroud with the two
fans on the power supply side of the chassis.
Chapter 2: Maintenance and Component Installation
Figure 2-15. Installing the Air Shroud
37
Cut hole for
power cables
(optional)
Advertisement
Table of Contents
