Table of Contents
Advertisement
SuperServer E403-9D-4C/8CN/12C/14C/14CN/16C-FN13TP User's Manual
3. Mark two keyhole spots on the surface where the server will be mounted. The two
keyholes for each orientation are circled in red. See Figure 2-17.
4. Install the two keyhole screws or nails.
5. Mount the server onto the two screws or nails.
6. Install screws or nails in all the holes circled in blue. See Figure 2-17.
Note: The weight of a fully populated system can reach up to 21 lbs or 8.3 kg.
40
Advertisement
Table of Contents
