Astoria 1GR Use And Maintenance Manual page 43

6.14.5 Programming the Heating Unit
Pressure
This menu is used to program the heating unit pressure for
dispensing steam.
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
PRESS. HEATING UNIT
1.0 BAR
• Set the heating unit pressure (values from 0.9 to 1.2 bar)
via the ( + ) and ( - ) buttons.
• To confirm the entered parameters and move on to the
next programming function, press the (MODE) button.
6.14.6 Programming the Cup Warmer
This menu is used to program the cup warmer temperature
and activation.
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
CUP WARMER
• Set the temperature (70-100°C) via the ( + ) and ( - ) buttons.
• To confirm the entered parameters and move on to the
next programming function, press the (MODE) button.
To disable the cup warmer, set a temperature
lower than 70°C (---- will appear on the display)
or turn the cup warmer switch to OFF.
HIGH TEMPERATURE HAZARD: Please remem-
ber that a very high temperature can cause very
serious burns.
6.14.7 Programming the Automatic
Steam Wand Temperature
This menu is used to programme the automatic steam wand
activation temperature:
• Enter the programming mode and scroll through the menu
until the following is shown on the display:
AUTOMATIC STEAM WAND
• Set the temperature via the (+) and (-) buttons.
• To confirm the entered parameters and move on to the
next programming function, press the (MODE) button.
The actual temperature of the beverage may dif-
fer by a few degrees from the set temperature de-
pending on the amount of the beverage heated.
TECHNICIANS' manual
CURR = 7
80°C
65°C
6.14.8 Displaying and resetting the litre
counter
This menu is used to display the litre counter and reset it:
• Enter the programming mode and scroll through the menu
until the litre counter is shown on the display.
LITRE COUNTER
L = NNNNN
• Press the ( - ) button to perform the reset.
RESET COUNTS?
PRESS FOR 3 SECS. +
• Press and hold the ( + ) button for at least 3 seconds to
confirm the reset operation.
LITRES RESET
• To confirm and move on to the next programming func-
tion, press the (MODE) button.
6.14.9 Coffee totals
This menu is used to display the count of the jobs performed
by the machine:
• Enter the programming mode and scroll through the menu
until the coffee counter is shown on the display.
COFFEE TOTALS
• Press the (ENTER) button to enter the menu.
• Repeatedly press the (ENTER) button (the LEDs of the var-
ious buttons will light up) to view the number of selections
performed by the respective button.
• To confirm and move on to the next programming func-
tion, press the (MODE) button.
To reset the counts of the single dose buttons, proceed as fol-
lows:
• Press and hold the
button panel for at least 5 seconds.
RESET COUNTS?
PRESS FOR 3 SECS. +
• To start the reset operation, press the ( - ) button.
DATA RESET
NNNNN
button on the right-hand push-
45 108
of