fantastic furniture Cooper Bedside 1 Drawer Manual page 11

Step 13
You will need
4 x Cam Nuts
Phillips head
(H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 4 x cam nuts (H2) into the left and right drawer sides (P9, P10), rotate the cam nuts (H2) so
the arrow is pointing towards the incoming cam bolt (H1).
To secure the left and rightdrawer sides (P9, P10) to the drawer front (P8), use the phillips head
screwdriver to tighten the small cam nuts (H2).
Step 14
Slide the drawer base (P12) into the grooves of the left and right drawer sides (P9, P10) and
the drawer front (P8).
www.fantasticfurniture.com.au
PAGE 11