Advertisement
Step 7
You will need
2 x Cam Nuts
Phillips head
(H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert 2 x cam nuts (H2) into the shelf (P6) . Rotate the cam nuts (H2) so the arrow is
pointing towards the incoming cam bolt (H1).
To fix the shelf (P6) to the right side panel (P3), use the phillips head screwdriver to tighten
the cam nuts (H2).
Step 8
You will need
5 x Cam Nuts
Phillips head
(H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert cam nuts (H2) into front rail (P5), shelf (P6) and back panel (P7). Rotate the cam nuts
(H2) so the arrow is pointing towards the incoming cam bolt (H1).
To fix the front rail (P5), shelf (P6) and back panel (P7) to the left side panel (P2), use the
phillips head screwdriver to tighten the cam nuts (H2).
www.fantasticfurniture.com.au
PAGE 8
Advertisement
