Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Cooper Bedside 1 Drawer
Summary of Contents for fantastic furniture Cooper Bedside 1 Drawer
- Page 1 Version 1.0 Cooper Bedside 1 Drawer www.fantasticfurniture.com.au...
- Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...
-
Page 3: Assembly Checklist
Assembly checklist Make sure you have all the required tools. Read through the instructions carefully Never use power tools unless instructed. before you begin. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled. -
Page 4: What You Need
What You Need To Assemble the Product Other Tools You Need Phillips Head Screwdriver Top Panel (P1) Right Side Panel (P3) Part LIst Box 1: 1 x Top Panel (P1); Back Panel 1 x Left Side Panel (P2); Top Panel Rail (P7) 1 x Right Side Panel (P3);... - Page 5 Step 1 You will need (P5) 4 x Wooden (P7) Dowels (H3) Insert 2 x wooden dowels (H3) into the front rail (P5). Insert 2 x wooden dowels (H3) into the back panel (P7). Step 2 You will need 5 x Cam Phillips head Bolts (H1) screwdriver...
- Page 6 Step 3 (H9) (H7) You will need (H9) (H9) 1 x Left Runner Phillips head Track (H7) screwdriver (P2) 3 x Small Screws (H9) Fix the left runner track (H7) to the left side panel (P2) with 3 x small screws (H9) by tightening with a phillips head screwdriver.
- Page 7 Step 5 You will need 1 x Right Runner Phillips head Track (H8) screwdriver 3 x Small Screws (H9) Fix the right runner track (H8) to the right side panel (P3) with 3 x small screws (H9) by tightening with a phillips head screwdriver. Step 6 You will need 3 x Cam Nuts...
- Page 8 Step 7 You will need 2 x Cam Nuts Phillips head (H2) screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 9 Step 9 You will need 7 x Cam Phillips head Bolts (H1) screwdriver Fix 7 x cam bolts (H1) to the top panel (P1) by tightening with a phillips head screwdriver. Step 10 You will need 2 x Large Phillips head Screws (H4) screwdriver Fix the top panel rail (P4) to the top panel (P1) with 2 x large screws (H4) by tightening with...
- Page 10 Step 11 You will need 7 x Cam Nuts Phillips head (H2) screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 11 Step 13 You will need 4 x Cam Nuts Phillips head (H2) screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 12 Step 15 You will need 4 x Large Phillips head Screws (H4) screwdriver Use 4 x large screws (H4) to fix the drawer back (P11) to the drawer sides (P9, P10), by tightening with the phillips head screwdriver. Step 16 You will need 6 x Small Screws Phillips head...
- Page 13 Step 17 Carefully slide the drawer into the cabinet. www.fantasticfurniture.com.au PAGE 13...
- Page 14 PAGE 14 www.fantasticfurniture.com.au...