Advertisement
Step 11
You will need
7 x Cam Nuts
Phillips head
(H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert cam nuts (H2) into the left side panel (P2), the right side panel (P3) and the back panel (P7) .
Rotate the cam nuts (H2) so the arrow is pointing towards the incoming cam bolt (H1).
To fix the left side panel (P2), the right side panel (P3) and the back panel (P7) to the top panel
(P1), use the phillips head screwdriver to tighten the cam nuts (H2).
Step 12
You will need
4 x Cam
Phillips head
bolts (H1)
screwdriver
Fix 4 x cam bolts (H1) to the drawer front panel (P8) by tightening with a phillips head
screwdriver.
www.fantasticfurniture.com.au
PAGE 10
Advertisement
