Page 1
Version 1.0 Coda Bookcase 4 Shelf fantasticfurniture.com.au...
Page 2
Secure it! Reduce the risk of furniture tip-over accidents Please seek professional advice if you are in doubt of what fixing device to use. Recommended Weight Capacity :10kg/shelf • • • Do not • • Wall attachment guide (with available wood stud) (with available wood stud) crew Screw...
Page 3
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 3 fantasticfurniture.com.au...
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
What you need to assemble the product Top Panel DO NOT USE (P1) Other tools you need: Phillips Head Screwdriver; Hammer Divider Side Panel (P4) (P2) Shelf Panel (P3) Side Panel Divider (P2) (P5) Bottom Panel Parts list (P6) Top Panel (P1); 2 x Side Panels (P2);...
Page 6
Step 1 You will need 6 x Cam Bolts Phillips Head (H3) Screwdriver (P1) Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown. Step 2 You will need Phillips Head 4 x Cam Bolts Screwdriver (H3) (P2) x 2 Attach 2 x Cam Bolts (H3) into each Side Panel (P2) as shown.
Page 7
Step 4 You will need 2 x Long 2 x Long Dowels (H10) Screws (H5) (P4) (P3) Phillips Head Screwdriver Insert 2 x Long Dowels (H10) into the holes of Divider (P4) through Shelf Panel (P3) as shown. Attach Divider (P4) to Shelf Panel (P3) with 2 x Long Screws (H5) using a Phillips Head Screwdriver.
Page 8
Step 6 You will need (P3) (P4) 2 x Small 2 x Cam Nuts Dowels (H2) (H4) (P5) Phillips Head Screwdriver (P2) Insert 2 x Small Dowels (H2) into the holes of Shelf Panel (P3). Insert 2 x Cam Nuts (H4) into the holes of Shelf Panel (P3). Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
Page 9
Step 8 You will need (P1) (P2) 4 x Dowels 2 x Small (H1) Dowels (H2) (P4) 6 x Cam Nuts 6 x Covers (H4) (H8) Phillips Head Screwdriver (P2) Insert 4 x Dowels (H1) into the holes of Side Panels (P2). Insert 2 x Small Dowels (H2) into the holes of Divider (P4).
Page 10
Step 10 You will need 4 x Plastic Hammer Glides (H9) (P6) Place glides 10mm from edge. Attach 4 x Plastic Glides (H9) to the bottom of Bottom Panel (P6) with a Hammer. We strongly advise that you use Seek advice from a qualified Step 11 the wall safety strap provided to trades person on how to...
Need help?
Do you have a question about the Coda and is the answer not in the manual?
Questions and answers