Page 1
Version 1.0 Cove Lowboy 3 Drawer fantasticfurniture.com.au...
Page 2
We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 2 fantasticfurniture.com.au...
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly.
What you need Top Panel (P1) to assemble the product Right Side Panel (P4) Rail Back (P7) DO NOT USE Panel (P5) Other tools you need: Rail Phillips head screwdriver; (P8) Hammer Rail Rail (P6) (P8) Left Side Back Panel (P3) Parts list Panel (P5) Top Panel (P1);...
Page 5
Step 1 You will need 4 x Cam Bolts Phillips Head (H3) Screwdriver (P1) Attach 4 x Cam Bolts (H3) to Top Panel (P1) as shown. Tighten with a Phillips Head Screwdriver. Step 2 You will need 8 x Cam Bolts 18 x Small (H3) Screws (H5)
Page 6
Step 3 (P7) (P6) (P8) You will need (P8) 4 x Dowels 4 x Cam Nuts (H1) (H4) Phillips Head Screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut.
Page 7
Two People Step 5 (P5) Required (P4) (P3) With assistance, carefully turn the unit upright. Slide 1 x Back Panel (P5) into the grooves of Left & Right Side Panel (P3 & P4). Step 6 You will need (P1) 4 x Dowels 4 x Cam Nuts (P4) (H1)
Page 8
Two People Step 7 (P5) Required (P3) (P4) With assistance, carefully turn the unit upside down. Slide 1 x Back Panel (P5) into the grooves of Left & Right Side Panels (P3 & P4). Two People Step 8 You will need Required (P2) 4 x Dowels...
Page 9
H10 H10 Step 9 You will need 20 x Screws 4 x Brackets (H10) (H11) Phillips Head Screwdriver Attach 4 x Brackets (H11) to Bottom Panel (P2) with 20 x Screws (H10) as shown. Tighten with a Phillips Head Screwdriver. Step 10 Two People (P9)
Page 10
Step 11 You will need 15 x Cam Bolts Phillips Head (H3) Screwdriver (P10) Attach 5 x Cam Bolts (H3) to Drawer Front (P10) by tightening with the Phillips Head Screwdriver. Step 12 You will need (P12) 15 x Long Phillips Head Screws (H2) Screwdriver...
Page 11
Step 13 (P14) (P12) (P11) Slide Drawer Base (P14) into the grooves of Left & Right Drawer Side (P11 & P12). Step 14 You will need (P10) 15 x Cam Nuts Phillips Head (H4) Screwdriver (P15) (P12) Insert 5 x Cam Nuts (H4) into (P11) Left &...
Page 12
Step 15 (P12) You will need 3 x DL 3 x DR Runners (H8) Runners (H9) (P11) 12 x Small Phillips Head Screws (H5) Screwdriver Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P11) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P12) with 4 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Page 13
Step 17 You will need (P1) 8 x Wedges 8 x Wedge (H12) Screws (H13) (P5) 1 x Safety 1 x Screw Strap (H14) (H15) (P5) 1 x Washer Phillips Head We strongly advise (H16) Screwdriver that you use the wall safety strap provided to prevent the unit toppling.