Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture Como 2.0
Summary of Contents for fantastic furniture Como 2.0
- Page 1 Version 1.0 Como 2.0 Bedside 2 Drawer fantasticfurniture.com.au...
- Page 2 Secure it! Reduce the risk of furniture tip-over accidents Please seek professional advice if you are in doubt of what fixing device to use. Recommended Weight Capacity : 10kg/Drawer • • • Do not • • Wall attachment guide (with available wood stud) (with available wood stud) crew...
- Page 3 We’re thrilled you’ve chosen Fantastic Furniture to help create a home you’ll love! Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasticfurniture Page 3 fantasticfurniture.com.au...
-
Page 4: Assembly Checklist
Assembly Checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Unless instructed, do not fully tighten Identify and lay out all of the screws until the item is fully assembled. components before you begin assembly. -
Page 5: What You Need
Right Side Rail Panel What you need (P6) (P4) to assemble the product Back Panel Top Panel (P5) (P1) DO NOT USE Rail Other tools you need: (P7) Phillips head screwdriver; Hammer Left Side Parts list Panel Top Panel (P1); Bottom Panel (P3) Bottom Panel (P2) - Page 6 Step 1 You will need 6 x Small 2 x CL Runner Screws (H5) Tracks (H6) (P3) Phillips Head Screwdriver Attach 2 x CL Runner Tracks (H6) to the Left Side Panel (P3) using 6 x Small Screws (H5), tightening with the Phillips Head Screwdriver. Step 2 You will need 4 x Cam...
- Page 7 Step 4 You will need 4 x Cam Phillips Head Bolts (H3) Screwdriver (P4) Attach 4 x Cam Bolts (H3) to the Right Side Panel (P4). Tighten with a Phillips Head Screwdriver. Step 5 You will need 2 x Dowels 3 x Long (H1) Screws (H2)
- Page 8 Step 6 You will need (P6) 4 x Dowels 3 x Cam Nuts (H1) (H4) (P1) Phillips Head Screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt.
- Page 9 H1 H1 Step 8 You will need (P6) 5 x Dowels (H1) (P1) (P7) Insert 5 x Dowels (H1) into the Top Panel (P1) and Rails (P6, P7) as shown. Step 9 You will need (P4) 4 x Cam Nuts Phillips Head (H4) Screwdriver...
- Page 10 Step 10 You will need 6 x Cam Phillips Head Bolts (H3) Screwdriver (P2) Attach 6 x Cam Bolts (H3) to the Bottom Panel (P2). Tighten with a Phillips Head Screwdriver. Step 11 You will need (P2) 4 x Dowels 4 x Long (H1) Screws (H2)
- Page 11 Step 12 You will need (P8) (P8) 4 x Dowels 4 x Cam Bolts (H1) (H3) (P9) 4 x Cam Nuts Phillips Head (H4) Screwdriver (P9) (P8) Insert 4 x Cam Bolts (H3) into 2 x Rails (P8). Insert 4 x Cam Nuts (H4) and 4 x Dowels (H1) into 2 x Rails (P9) as shown. Rotate the Cam Nuts so the arrows point towards the incoming Cam Bolts.
- Page 12 Step 14 You will need (P9) (P8) Plastic Hammer (H11) Glides (P8) (P9) Secure 4 x Plastic Glides (H11) to the Rails (P8, P9) as shown using a hammer. Step 15 You will need (P5) 12 x Screws Phillips Head (P6) (P3) (H12)
- Page 13 Step 16 You will need 4 x Cam Phillips Head Bolts (H3) Screwdriver (P10) Attach 4 x Cam Bolts (H3) to the Drawer Front (P10). Tighten with a Phillips Head Screwdriver. Step 17 (P11) You will need 4 x Cam Phillips Head (P12) Nuts (H4)
- Page 14 Step 19 (P13) You will need (P11) 4 x Screws Phillips Head (H10) Screwdriver (P12) Attach Drawer Back (P13) to Drawer Sides (P11, P12) with 4 x Screws (H10), make sure that the groove lines up the whole way around the drawer. Step 20 (P12) You will need...
- Page 15 Step 22 (P16) You will need (P17) 4 x Cam Phillips Head Nuts (H4) Screwdriver Insert 4 x Cam Nuts (H4) into the holes of Drawer (P15) Sides (P16, P17). Rotate the cam nuts so the arrows point towards the incoming cam bolts, secure the Drawer Sides (P16, P17) to the Drawer Front (P15) and tighten with a Phillips Head Screwdriver.
- Page 16 Step 25 You will need (P17) 1 x DL Runner 1 x DR Runner (H8) (H9) (P16) 6 x Small Phillips head Screws (H5) screwdriver (P15) Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P16) and 1 x DR Runner (H9) to the bottom of Right Drawer Side (P17) with 6 x Small Screws (H5).
-
Page 17: Job Complete
Step 27 wall You will need Screw 1 x Washer Phillips head (H14) screwdriver Screw and Wall Plug are not provided. Please use appropriate fixtures for your wall. Seek advice from a qualified trades person on how to attach this safety strap to your specific wall.