fantastic furniture Cooper Bedside 1 Drawer Manual page 7

Step 5
You will need
1 x Right Runner
Phillips head
Track (H8)
screwdriver
3 x Small Screws
(H9)
Fix the right runner track (H8) to the right side panel (P3) with 3 x small screws (H9) by
tightening with a phillips head screwdriver.
Step 6
You will need
3 x Cam Nuts
Phillips head
(H2)
screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Insert cam nuts (H2) into the front rail (P5) and back panel (P7). Rotate the cam nuts (H2)
so the arrow is pointing towards the incoming cam bolt (H1).
To fix the front rail (P5) and back panel (P7) to the right side panel (P3), use the phillips
head screwdriver to tighten the cam nuts (H2).
www.fantasticfurniture.com.au
PAGE 7