Securam ScanLogic B22 Operation Instructions Manual page 6

ScanLogic B22
•
Manager Code (ID01) is 123456
It is strongly recommended that both these default codes are changed before the lock system is put into
service.
4.1 Change Code
The B22 has 2 codes by default:

Super Code: 1 1 1 1 1 1

Manager Code: 1 2 3 4 5 6
Note: The default codes must be changed before usage; otherwise you cannot add new users or pair the
lock to the APP.
The following steps describe the Change Code process:
Step1: Press the Menu/OK button
Step 2: At "My Menu", press the Menu/OK button
Step 3: The display will prompt you to login. Enter a valid Super or Manager Code and press
Menu/OK; or place an enrolled finger on the fingerprint scanner.
Step 4: Scroll "▼" to the menu selection "Change My Code" and Press Menu/OK
Step 6: Enter the new 6 digit code. Note: Code cannot be set to 1 1 1 1 1 1 or 1 2 3 4 5 6
Step 7: Repeat the new 6 digit code.
Operation Instructions
6