Securam ScanLogic B22 Operation Instructions Manual page 16

ScanLogic B22
Step 3: The display will prompt you to login. Enter a valid Super or Manager Code and press
Menu/OK; or place an enrolled finger on the fingerprint scanner.
Step 4: After logging in, the screen will show "Users".
Step 5: Scroll "▼"or "▲"to the menu selection "Lock Settings" and press Menu/OK
Step 6: The screen will now show "Factory Reset" press Menu/OK
Step 6: Press Menu/OK to confirm
Step 7: The screen will prompt the following and complete the factory reset.
7.2 Show Audit Trail
Step1: Press the Menu/OK button
Step 2: At "My Menu", press the Menu/OK button
Step 3: The display will prompt you to login. Enter a valid Super or Manager Code and press
Menu/OK; or place an enrolled finger on the fingerprint scanner.
Step 4: After logging in, the screen will show "Users".
Operation Instructions
16