Table of Contents
Advertisement
5
Backplane Installation
1.
Turn the chassis off and unplug the chassis from AC power.
2.
Before mounting the backplane, inspect the chassis to ensure there aren't any protruding metals.
Turn the backplane over to access the onboard 24-PIN ATX Power Connector.
Connect the ATX power cable to the onboard 24-PIN ATX Power Connector as shown from the photos below.
Install the board in the chassis / enclosure. The photos below are two available enclosures for the OSS-522 backplane.
OSS-PCIe4-BP-5X16
One Stop Systems
12
Advertisement
Table of Contents
