Electrical Connection Saturno - Cadel SATURNO 16 Installer Manual

Hide thumbs Also See for SATURNO 16:
Table of Contents

Advertisement

15

ELECTRICAL CONNECTION SATURNO

15.1 ELECTRICAL CONNECTION SATURNO
All electrical connections must be connected by qualified personnel in compliance with laws in force in each
Country; using suitable equipment and following the diagram provided in this booklet. All operations must be
performed with the 230V 50 Hz mains supply cable disconnected.
MCZ is not liable for damage to people or property due to incorrect connections or misuse of the device.
Perform the installation following the National safety regulations in force.
Make sure a suitable earthing line is available.
Check that the voltage and frequency of the electric power supply meet requirements (230Vac 50Hz)
First connect the power cable to the back of the stove and then to a wall socket.
It is recommended to disconnect the power cable when the stove is not used.
24
Fig. 18 - Rear outlet
Fig. 19 - ELECTRICAL CONNECTION
SATURNO

Advertisement

Table of Contents
loading

This manual is also suitable for:

Saturno 24

Table of Contents