Related Manuals for Cadel CRISTAL 9
Summary of Contents for Cadel CRISTAL 9
- Page 1 USER MANUAL Pellet Stove ©2022 CADEL srl | All rights reserved - Tutti i diritti riservati CRISTAL 9 - LIFE 9 CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9...
-
Page 2: Table Of Contents
8.16 EASY SET FEATURE (SEE SECTION X SETTINGS MENU (EU) 2015/1185 - (EU) 2015/1186 (PRODUCT FICHE) A PAG. 14) ...............20 ..............33 8.17 PELLETS RECIPE (SEE SECTION H SETTINGS MENU A CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 3: Manual Simbology
2014/53/EU (RED - Radio Equipment directive) 2011/65/EU (ROhS) Hereby CADEL S.r.l. declares that the radio equipment type Easy Connect Plus + Navel Stand Alone is in compliance with Directive 2014/53/EU. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 4: Revisions To The Publication
No part of this manual may be translated into other languages, adapted and/or reproduced, even in part, in other mechanical and/ or electronic form or media, for photocopies, recordings or other, without the prior written authorisation of CADEL S.r.l. The company reserves the right to make changes to the product at any time without prior notice. The owner company reserves its rights according to law. -
Page 5: Safety Requirements
• Packaging are not toys and could cause suffocation or strangulation and other health ha- zards! People (childreen included) with reduced mobility, psycological deseases or without CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 6: Cautions - Warranty Conditions
12 - 20% (it is best if the moisture is close to 12%, as is normally used in certification). As the fuel moisture increases, different combustion air settings are required, which are implemented from the CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 7: Warranty Conditions
The user will also be charged for any costs incurred to remedy the incorrect technical interventions, tampering or damage to the appliance, not attributable to original faults. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 8: Spare Parts
More specifically, the electric and electronic components must be separated and disposed of in authorised centres, in compliance with the WEEE directive 2012/19/EU and the relative national transpositions. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... - Page 9 Piping, fittings, expansion vessel, valves. If there Brass G. HYDRAULIC COMPONENTS are any, to be disposed of separately based on the Stainless steel material they are made of: Other materials CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9...
-
Page 10: Information For Management Of Electric And
- STAPLES FOR STRAP Check with the competent body on FE 40 - FASTENING BRACKET how to dispose of this packaging at the recycling depot CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 11: Wifi - Bluetooth Connection
Fig. 4 - App EASY CONNECT PLUS The documentation for connecting the Wi-Fi and using the App are available online at the following addresses: https://www.cadelsrl.com/donwload-wi-fi/ http://www.free-point.it/it/downloads/ https://www.pegasoheating.com/it/documenti/ CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 12: Navel Stand Alone (Optional)
Fig. 6 - App EASY CONNECT PLUS The documentation for connecting the Wi-Fi and using the App are available online at the following addresses: https://www.cadelsrl.com/donwload-wi-fi/ http://www.free-point.it/it/downloads/ https://www.pegasoheating.com/it/documenti/ CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 13: Use
Temperature set by user Instant power Ambient temperature If there is ". " = 0.5 °C (29.° = 29.5°) Wi-Fi connection (optional - see dedicated manual) CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 14: Main Menu
• Scroll to “Cleaning” using the arrows. • Press “menu” to confirm. • Select “On” with the + - keys. • Press “menu” to confirm and “esc” to exit. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... - Page 15 • Press the “menu” button. • Scroll to “Settings” using the arrows • Press “menu” to confirm. • Scroll to “Pellet Recipe” using the arrows. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9...
-
Page 16: Info Menu
• To start the stove, keep the P1 button pressed until the ON sign and a flashing flame to its side appear. The ignition resistance pre-heating starts. After some seconds the feed screw loads pellets and the resistance pre-heating continues. When the tem- CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 17: Failed Ignition
(see Fig. 12). CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 18: Programmed Mode (Timer) - Main Menu
There are six TIMER programmes, for each one the user can decide the start-up and shutdown time as well as the day of the week in which it is active. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 19: Programming Examples
(air currents, poorly insulated rooms, etc.). CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 20: Sleep Function (Main Menu)
• It is recommended to change the factory settings under the supervision of an authorised technician. • Before installation, ensure the flue has been installed and certified by suitable personnel according to the legal provisions in force. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 21: Pag. 14)
+5= 5% increase with respect to the default setting. +10 = 10% increase with respect to the default setting. +15 = 15% increase with respect to the default setting. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 22: Smoke Rpm Variation
The use of pellets that do not comply with the characteristics specified previously may com- promise the operation of your product and therefore invalidate the warranty and product liability. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 23: Pellet Supply
• Do not cover the hot air outlet slits with any object to avoid stove’s overheating! • The stove is not suitable for food cooking. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 24: Remote Control (Optional)
• It controls pressure in the fume duct. It blocks the pellet feed screw in the following instances: • clogged exhaust • Significant negative (wind) • clogged fume passages • open pellet loading tank CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 25: Smoke Temperature Probe
If during stage 1 the boiler receives commands from the panel and thus carried out manually by the user, then the boiler stops executing the blackout recovery status and proceeds to restart or shutdown as requested by the command. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 26: Alarm Alerts
• After a long ineffective time, before turning on the stove check if there are obstructions in the fume exhaust. • If the stove had been using continuously and intensely, the whole system (chimney included), must be cleaned and checked CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 27: Before Each Start-Up
• Extract the burning pot (see Fig. 32) from its seat and empty it from the ash. • If necessary clean with a pointed object the holes obstructed by encrustations (see Fig. 33). CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 28: Hopper Cleaning
To clean ceramic or stone panels use a soft and dry cloth. If using any cleaners this will seep through the crazings putting them in evidence. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 29: Gasket Replacement
A summary of the checks and/or maintenance operations that are essential for the correct operation of the product is provided below. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... -
Page 30: In Case Of Anomaly
Faulty control Replace the control display. does not switch on display Faulty flat cable Replace the flat cable. Faulty electronic Replace the mother board. board CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... - Page 31 Pellet drop value too Adjust the pellet loading. low "phase 1" Check if on the display there is an Have the stove checked. "ACTIVE ALARM" CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9...
- Page 32 When this flashing message appears upon start-up, it means that display showing ce alert (it does not the preset operating hours have elapsed before maintenance. "SERVICE" block the system) Contact the service centre. CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9...
-
Page 33: Technical Documentation For Local Space
Observe the specific precautions for installation, assembly and maintenance indicated in the manual accompanying the product. Issue date: 08.02.2022 TECHNICAL DOCUMENTATION FOR LOCAL SPACE HEATERS ACCORDING TO CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9... - Page 34 Pilot flame power requirement (if applicable) (P N.A. pilot Observe the specific precautions for installation, assembly and maintenance indicated in the manual accompanying the product. Issue date: 08.02.2022 CRISTAL 9 - LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9...
- Page 35 NOTE...
- Page 36 Rev. 00 - 2022 CADEL srl www.cadelsrl.com 31025 S. Lucia di Piave - TV www.free-point.it Via Foresto sud, 7 - Italy www.pegasoheating.com Tel. +39.0438.738669 Fax +39.0438.73343...
Need help?
Do you have a question about the CRISTAL 9 and is the answer not in the manual?
Questions and answers