Electrical Connection; Electrically Connecting The Stove; Stove Power Supply - Cadel IDRO PRINCE 3 12 Installation, Use & Maintenance Manual

8

ELECTRICAL CONNECTION

8.1

ELECTRICALLY CONNECTING THE STOVE

Connect the power cable first to the back of the stove, then to a wall plug.
Only use the main switch to turn on the stove; otherwise, it is a good idea to keep it off.
When the stove is not in use, it is advisable to unplug the power cable.
8.2

STOVE POWER SUPPLY

Once the power cable is connected to the back of the stove, move the switch (also located on the back) to the (I) position.
The illuminated button of the switch will come on.
The switch on the back of the stove is used to power the system.
There is a fuse holder compartment on the back of the stove, under the power plug. Use a screwdriver to open the fuse holder
compartment cover and, if necessary, replace the fuses (3.15 A time delay).
40
IDRO PRINCE 12-16-23-23 H
3
Fig. 48 - Electrically connecting the stove
LEGEND
A
B
C
O - IDRO PRINCE 30-30 H O - AQUOS 16-23-23 H
2 2 3
Fig. 49 - Switch
Fig. 48
Stove power supply
Stove On/Off switch
Fuse holder compartment
O - IDRON 16-22 AIRTIGHT - MIRA 16-22 - TESIS 16-23 AIRTIGHT - HIDROFIRE 22.8
2