Alignment Aid; Test Rod - Pepperl+Fuchs SLCS Original Instructions Manual

Table of Contents

Advertisement

Safety Light Curtain SLCS
Appendix
9.8.5
EN
9.8.6
42 - EN

Alignment aid

Order code: AA-SLCT-01
The transmitter and receiver should always be aligned at the same height in
parallel to one another. The AA-SLCT-01 alignment aid with bubble level assists
the perpendicular alignment of the profile. The AA-SLCT-01 alignment aid is
simply clipped into the groove on the side of the profile.
ø 21
24.5
11.1
ø 5.5
20
14
Figure 9.12
Dimensional drawing and assembly of the alignment AA-SLCT-01

Test rod

Order code: TR 14/30/50/60
The detection capability of a safety light curtain should be checked regularly using
a test rod. The test rod must be kept next to the safety light curtain. At regular
prescribed intervals, the protection field must be tested at different points over its
entire height (in front of the transmitter and receivers and in the center between
the transmitter and receiver) and the results must be documented.
The receiver of every safety light curtain comes with a test rod 230 mm in length.
The rod is suitable for checking the detection capability of light curtains with
different resolutions.
21.5
23.4

Advertisement

Table of Contents
loading

Table of Contents