E Outdoor Temperature Lock - RADEMACHER ReWiSo 2696 Instruction Manual For The Electrical Connection And For Commissioning

i E. Outdoor temperature lock EN
After setting the indoor temperature lock, now enter the outdoor temperature below
which the sun shading should not be moved.
The outdoor temperature lock is important when sun shading is installed on the outside
of the building. In the event of frost, the awning or Venetian blind can freeze in the guide
rails. If the sun shading is then moved, it can be damaged. Note that the guide rails
or other mechanical parts may still be frozen even when the outdoor temperature has
already risen to quite high values. Ask your conservatory builder for the temperature
limit for your sun shading.
If your sun shading can still operate even at low temperature or if it is installed on the
inside, deactivate the outdoor temperature lock (display ).
The outdoor and indoor temperature locks are only active in automatic mode.
Operation by hand is still possible. Therefore pay attention to possible freezing
when opening and closing the sun shading manually.
The default setting for the outdoor temperature lock is 5° C.
Adjust the value with (higher) and (lower) or select (off) to deactivate
the outdoor temperature lock. Then press SET to proceed to the setting of the next
parameter.
14