Outdoor Temperature Limit - RADEMACHER ReWiSo Installation And Operating Instructions Manual

i
E. Outdoor Temperature Limit
GB
After setting the indoor temperature limit, now enter the outdoor temperature below
which the sunshade should not be moved.
The outdoor temperature limit is important with sunshade installed on the outside of
the building. In the event of frost, the awning or Venetian blind can freeze in the guide
rails. If the sunshade is then moved, it can be damaged. Note that the guide rails or
other mechanical parts may still be frozen even when the outdoor temperature has
already rised to quite high values. Ask your conservatory builder for the temperature
limit for your sunshade.
If your sunshade can still operate even at low temperature or if it is installed on the
inside, deactivate the outdoor temperature limit (display ).
The outdoor and indoor temperature limits are only active in Automatic mode.
Operation by hand is still possible. Therefore pay attention to possible freezing
when opening and closing the sunshade manually.
The default setting for the outdoor temperature limit is 5° C.
Adjust the value with (higher) and (lower) or select to deactivate the outdoor
temperature limit. Then press SET to proceed to the setting of the next parameter.
152