Preparation Of The Weather Station - RADEMACHER ReWiSo 2696 Instruction Manual For The Electrical Connection And For Commissioning

i Installation of the weather station and connection of the drive

Preparation of the weather station

1 = Cover with rain
sensor
2 = Cover latch
3 = PCB
4 = Lower housing
section
Unlock the cover
and lift off from above
The cover of the weather station with the rain sensor is latched at the lower edge on the
left and right (see Fig.). Remove the cover from the weather station. Proceed carefully
to avoid tearing off the cable connection between the PCB in the lower section and
the rain sensor in the cover.
EN
31