D Indoor Temperature Lock - RADEMACHER ReWiSo 2696 Instruction Manual For The Electrical Connection And For Commissioning

i C. Retraction delay
Adjust the value with
setting of the next parameter.
i
D. Indoor temperature lock
After setting the retraction delay, now enter the indoor temperature below which
the extension of the sun shading is to be blocked.
Using the indoor temperature lock, you can use the heat of the sun to achieve the desired
room temperature (e.g. in the winter - energy-saving function). The sun shading only
extends in the sunshine when the value is exceeded. The indoor temperature lock
is active only when the controller is in automatic mode. Manual operation of the sun
shading is still possible.
The default setting for the indoor temperature lock is 18° C.
Adjust the value with
indoor temperature lock. Then press SET to proceed to the setting of the next parameter.
(lower). Then press SET to proceed to the
(higher) and
(higher) and (lower) or select
EN
(off) to deactivate the
13