Display Of Brightness And Wind Velocity - RADEMACHER ReWiSo 2696 Instruction Manual For The Electrical Connection And For Commissioning

i Operation
Automatic mode active
Manual mode active. The connected drive was operated manually (with the
arrow buttons) or the
thus deactivated and the awning or Venetian blind is not controlled according to
brightness or temperature. The safety functions 'Rain alarm' and 'Wind alarm'
remain active. The controller remains in manual mode until it is switched to
automatic mode with the
Rain alarm. Outdoor awnings are retracted, manual operation is blocked.
The rain alarm function can be activated and deactivated in the automatic
settings (e.g. for indoor awnings or Venetian blinds).
Wind alarm. Outdoor awnings or Venetian blinds are retracted, manual operation
is blocked. The wind alarm function can be activated and deactivated in the
automatic settings (e.g. for indoor awnings).

Display of brightness and wind velocity

Press the SET button once briefly while the temperature is displayed to display the
current brightness (in kilolux, kLux) and wind velocity (in metres per second, m/s).
The values are refreshed every 4 seconds.
Note: The wind velocity is not correctly displayed during the first approx. 90 seconds
after the power is restored to the weather station (e.g. after a power failure or during
commissioning). Manual operation is therefore blocked during this period if the wind
alarm is active.
Pressing SET again briefly recalls the temperature display (or the central command
display, see next section). The temperature is also displayed again automatically after
approx. 60 seconds.
button was pressed. The automatic functions are
button.
EN
7