Manual Operation - RADEMACHER ReWiSo 2696 Instruction Manual For The Electrical Connection And For Commissioning

Hide thumbs Also See for ReWiSo 2696:

Table of Contents

Operation

Manual operation

Manual control, pre-setting of the automatic functions and the basic setting of the

connected sun shading are performed with the buttons on the operating unit.

The connected awning or Venetian blind can be operated by hand using the buttons

and

. The arrow buttons have an automatic timer function. Pressing the buttons

briefly (less than 1 second) allows the awning or Venetian blind to be exactly positioned.

If the button is held depressed for longer than 1 second, the drive automatically runs

up to the end position. Pressing

If the rain or wind alarm is active, manual operation is blocked.

Manual/Automatic

The

button switches back and forth between automatic mode (display

and manual mode (display

buttons, it is then in manual mode. The automatic functions are then

deactivated and the awning or Venetian blind is not controlled according to brightness

or temperature. The

mode (display

Pressing the SET button briefly calls up the brightness and wind velocity display.

Holding the button depressed calls up the setting mode for the automatic functions and

the basic setting. For further details, see the section "Setting the automatic functions"

or "Basic setting".

Stop

Down

). If the controller is operated manually using the

button can be used to switch the controller back to automatic

stops the drive.

)

Table of Contents