Radio Connection To The Weather Station - RADEMACHER ReWiSo 2696 Instruction Manual For The Electrical Connection And For Commissioning

i

1. Radio connection to the weather station

The first step is the teach-in (or later also clearing) of the radio connection.
The teach-in may only be carried out by a qualified electrician as the programming
button is inside the weather station.
Select the desired step with the
(Continue) to skip this step,
(Learn) to learn a radio connection to the weather station,
(Clear) to delete an existing radio connection.
Confirm your selection with the SET button.
When you have confirmed
flashing and the radio waves are animated (they "run").
Now press the orange programming button inside the weather station to learn the
radio connection. (An overview of the PCB can be found in the section "Preparing the
weather station".)
Learning was successful when the LED next to the programming button flashes
twice briefly and the display switches to step 2 of the basic settings (rotation direction
of the motor).
If you confirm
The display jumps automatically to
taught-in.
20
button:
(Learn) with the SET button, the radio symbol stops
(Clear) with the SET button, the radio connection is cleared.
(Learn) to enable a new connection to be
EN