Linking; Dmx Mode; Dmx Addressing - ProLights SMARTBATHEX User Manual

3.16 LINKING

1. Connect the DMX OUT of the master unit via 3-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.

3.17 DMX MODE

• Press the button MENU so many times until shows, CH6, CH8 or CH12 and press the button ENTER to
confirm.
• Press the button UP/DOWN to select the desired DMX address d001 - d512. Press and hold to scroll quick-
ly. Press ENTER button to store.
The tables on page 17 indicate the operating mode and DMX value. The SMARTBATHEX is equipped with
3 pole XLR connections.

3.18 DMX ADDRESSING

To able to operate the SMARTBATHEX with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the SMARTBATHEX.
The other functions of the light effect panel are then automatically assigned to the following addresses. At
the next page an example with the start address 33 is shown below:
Number of Start address
DMX channels (example)
6 33
8 33
12 33
DMX Address: 33
DMX512 Controller
SMARTBATHEX
DMX Address Next possible start
occupied address for unit No. 1
33-38
33-40
33-44
DMX Address: 39
Next possible start
address for unit No. 2
39
41
45
DMX Address: 45
Fig.9 - Example 6 DMX channels configuration
Next possible start
address for unit No. 3
45
49
57
DMX Address: 51
13
51
57
69
. . . . . . . . . . . .