Table of Contents
Advertisement
REMOTE CONTROL
USER GUIDE
The optional remote control provides the user with added functionality
for controlling their blinds. Your SMART WAND™(s) must be programmed
remote also allows the user to set up separate channels to control specified
before they can be paired to a remote. The remote control contains single
push ability to move the slats open, closed, or to your favorite position. The
blinds for customized control.
Tilt Up/ Left
Tilt Down/ Right
Channel Selector
26
Full Up/ Left
Full Open
Full Down/ Right
Favorite
CH
CH
Channel LEDs
1
2
3
4
5
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
REMOTE BUTTON DESCRIPTIONS
Briefly press and release to move the slats in the open or closed
TILT TOGGLE
direction and will stop at the next position setting. There are seven
(7) position settings from the full up to the full down position. The
user may also press and hold the toggle button until the slats get to the
desired position, then release the toggle.
FULL UP/ LEFT
Moves the slats to the full up position for horizontal blinds or full right
position for vertical blinds.
FULL OPEN
Moves all slats to the full open position.
FULL DOWN/ RIGHT
Moves all slats to the full down position for horizontal blinds, or full
left position for vertical blinds.
FAVORITE
The user can program this button to any position they choose to be
their most preferred position; however, if left unchanged it will move
the slats to approximately half way between the full open and the full
down/ left position.
CHANNEL SELECTOR
Used to customize control of multiple blinds on a single remote. The
currently selected channel is indicated by the Channel LEDs. Pressing
the CHANNEL Button once will display the current channel. Pressing
it again will switch to the next channel. When all LEDs are lit, the
remote is selected to broadcast on all channels.
27
Advertisement
Table of Contents
