Table of Contents
Advertisement
Project Planning Manual | Rexroth IndraControl VDP 92.3
10
Environmental Protection and Disposal
10.1
Environmental Protection
Production Processes
Prohibited Substances
No Release of Hazardous Substan‐
Significant Components
10.2
Disposal
Return of Products
Packaging
Recycling
The products are made with energy- and resource-optimized production pro‐
cesses which allow re-using and recycling the resulting waste. We regularly try
to replace pollutant-loaded raw materials and supplies by more environment-
friendly alternatives.
We guarantee that out products include no substances according to the chem‐
icals-ban-decree. We furthermore declare that our products are free of mercury,
asbestos, PCB and chlorinated hydrocarbons.
Our products do not contain any hazardous substances which may be released
ces
in the case of appropriate use. Normally, our products will not have any negativ
influences on the environment.
Basically, out products contain the following components:
Electronic devices
∙ steel
∙ aluminium
∙ copper
∙ synthetic materials
∙ electronic components and modules
Our products can be returned to our premises free of charge for disposal. It is
a precondition, however, that the products are free of oil, grease or other dirt.
Furthermore, the products returned for disposal must not contain any undue
foreign material or foreign components.
Send the products "free domicile" to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Buergermeister-Dr.-Nebel-Strasse 2
97816 Lohr am Main, Germany
The packaging materials consist of cardboard, wood and polystyrene. These
materials can be recycled anywhere without any problem.
For ecological reasons, please refrain from returning the empty packages to
us.
Most of the products can be recycled due to their high content of metal. In order
to recycle the metal in the best possible way, the products must be disassem‐
bled into individual modules.
Metals contained in electric and electronic modules can also be recycled by
means of special separation processes. The synthetic materials remaining after
these processes can be thermally recycled.
If the products contain batteries or accumulators, these have to be removed
before recycling and disposed of.
Electric Drives
| Bosch Rexroth AG
and Controls
Environmental Protection and Disposal
Motors
∙ steel
∙ aluminium
∙ copper
∙ brass
∙ magnetic materials
∙ electronic components and modules
45/52
Advertisement
Table of Contents
