Maintenance And Repair; Cleaning And Care; Inspection And Maintenance; Repair - Bosch rexroth CP1 Instruction Manual

Maintenance and repair | Control panels CP1 and CP2 |

10 Maintenance and repair

10�1 Cleaning and care
For cleaning and care of the control panel, observe the following:
▶ Check whether all fittings on the plug-in connections are securely seated
to ensure that no moisture can penetrate into the control panel and the
installation space during cleaning.
▶ Contamination of the control panel, and especially of the rotary control,
should be eliminated immediately to ensure correct function.
▶ Do not expose the housing to extremely acidic or alkaline substances.
Avoid prolonged contact with oils and grease.
▶ Only use clean water and a damp cloth to clean the housing.
▶ When cleaning the control panel, do not use any coarse or abrasive cleaning
utensils.
10�2 Inspection and maintenance
No special activities are necessary.
10�3 Repair
It is not permissible to open the control panel or to modify or repair the
control panel. Modifications or repairs to the wiring could result in dangerous
malfunctions. Repairs to the control panel may only be performed by
Bosch Rexroth or by an authorized partner.
▶ Only use original spare parts from Rexroth, otherwise the functional reliability
cannot be guaranteed, and the warranty will be voided.
▶ Spare parts can be found online at www.boschrexroth.com/eshop
Address all questions regarding repair to your responsible Bosch Rexroth service.

11 Removal and replacement

▶ Before removal of the control panel, disconnect the power supply.

12 Disposal

Careless disposal of the control panel can lead to environmental pollution.
▶ Dispose of the control panel and packaging material in accordance with the
national regulations in your country.
RE 95259-01-B/2021-11-09, Bosch Rexroth AG
21/24