Combo Interface - H3C S5130S-EI Series Installation Manual

Table4-11 SFP+ copper cables available for the SFP+ ports
SFP+ copper cable
LSWM1STK
LSWM2STK
LSWM3STK
LSTM1STK
Table4-12 SFP+ fiber cables available for the SFP+ ports
SFP+ fiber cable
SFP-XG-D-AOC-7M
SFP-XG-D-AOC-10M
SFP-XG-D-AOC-20M
Figure4-1 10-GE SFP+ cable
2
1
(1) Connector
NOTE:
• As a best practice, use H3C SFP/SFP+ transceiver modules or SFP+ cables for the SFP+ ports.
• The H3C SFP/SFP+ transceiver modules and SFP+ cables available for the SFP+ ports are
subject to change over time. For the most up-to-date list of H3C SFP/SFP+ transceiver modules
and SFP+ cables available for the SFP+ ports, contact your H3C sales representative or
technical support engineer.
• For the specifications for the H3C SFP/SFP+ transceiver modules and SFP+ cables, see H3C
Transceiver Modules User Guide.

Combo interface

The S5130S-28P-HPWR-EI and S5130S-28S-HPWR-EI switches each provide four combo
interfaces. The S5130S-12TP-EI, S5130S-28TP-EI, S5130S-52TP-EI, S5130S-12TP-HPWR-EI,
and S5130S-52F-EI switches each provide two combo interfaces. The S5130S-28F-EI and
S5130S-28PS-EI switches provide eight combo interfaces. Each combo interface contains an SFP
Max transmission distance
0.65 m (2.13 ft)
1.2 m (3.94 ft)
3 m (9.84 ft)
5 m (16.40 ft)
Max transmission distance
7 m (22.97 ft)
10 m (32.81 ft)
20 m (65.62 ft)
(2) Pull latch
4-56