H3C S5130S-EI Series Installation Manual page 17

Hide thumbs Also See for S5130S-EI Series:

Table of Contents

Align one mounting bracket with the screw holes at the mounting position. Use M4 screws to

attach the mounting bracket to the chassis. See

Figure2-4

and

Figure2-5

bracket C, D, and E (C as an example).

M4 screws are provided only for switches shipped with mounting brackets.

An optional mounting bracket kit contains M4 screws.

Repeat step

to attach the other mounting bracket to the chassis.

Figure2-3 Attaching mounting bracket A (S5130S-28P-HPWR-EI switch)

Figure2-4 Attaching mounting bracket B to the port side mounting position (S5130S-52F-EI

switch)

Figure2-5 Attaching mounting bracket B to the power supply side mounting position

(S5130S-52F-EI switch)

for installing mounting bracket B, and

2-10

Figure2-3

for installing mounting bracket A,

Figure2-6

for installing mounting

Table of Contents