H3C S5130S-EI Series Installation Manual page 58

Item S5130S-28TP-EI
Operating
–5°C to +45°C (23°F to 113°F)
temperature
Operating
5% to 95%, noncondensing
humidity
Fire
resistance UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
compliance
Table1-5 Technical specifications for non-PoE switch models (4)
Item
Dimensions (H × W × D)
Weight
Console port
10/100/1000BASE-T
autosensing Ethernet
port
SFP port
SFP+ port
Power supply slot
Input voltage
S5130S-52TP-EI
of the chassis and
exhaust heated air
out from the right
side and the power
supply side.
S5130S-28F-EI
43.6 × 440 × 360 mm (1.72 × 17.32 ×
14.17 in)
≤ 6 kg (13.23 lb)
•
1 × serial console port
•
1 × micro USB console port
When both ports are connected, only
the micro USB console port is
available.
8 (Each and its corresponding SFP
port form a combo interface.)
24 (The eight highest-numbered
SFP ports form combo interfaces
with their corresponding
10/100/1000BASE-T autosensing
Ethernet ports, respectively.)
4
2, at the rear panel
PSR75-12A:
•
Rated voltage:
100 VAC to 240 VAC @ 50 or 60 Hz

240 VDC

•
Max voltage:
90 VAC to 290 VAC @ 47 to 63 Hz

1-8
S5130S-28S-EI S5130S-52S-EI
S5130S-28S-EI-M S5130S-52S-EI-M
-PWR-EI-H1: exhaust heated air out
Natural cooling from the right side and
power supply side.
without fan
trays.
•
Other models:
Using fixed fan
trays to draw
ambient air in
from the left
side, right side,
and port side of
the chassis and
exhaust heated
air out from the
power supply
side.
S5130S-52F-EI
43.6 × 440 × 360 mm (1.72 × 17.32 ×
14.17 in)
≤ 6.5 kg (14.33 lb)
•
1 × serial console port
•
1 × micro USB console port
When both ports are connected, only the
micro USB console port is available.
2 (Each and its corresponding SFP port
form a combo interface.)
48 (The two highest-numbered SFP
ports form combo interfaces with their
corresponding 10/100/1000BASE-T
autosensing Ethernet ports,
respectively.)
4
2, at the rear panel