Qsfp+ Port; Combo Interface - H3C S5130-HI Series Installation Manual

NOTE:
• The fixed SFP+ ports on the switch do not support the SFP-XG-LH40-SM1550,
SFP-XG-LH40-SM1550-D, SFP-XG-LH80-SM1550, and SFP-XG-LH80-SM1550-D transceiver
modules.
• As a best practice, use only H3C SFP/SFP+ transceiver modules and SFP/SFP+ network cables
for the SFP+ ports.
• The SFP/SFP+ transceiver modules and SFP/SFP+ network cables available for the switch are
subject to change over time. For the most up-to-date list of SFP/SFP+ transceiver modules and
SFP/SFP+ network cables, consult your H3C sales representative or technical support engineer.
• For the specifications for the H3C SFP/SFP+ transceiver modules and SFP/SFP+ network
cables, see H3C Transceiver Modules User Guide.

QSFP+ port

The S5130-30S-HI, S5130-54S-HI, and S5130-54QS-HI switches provide 20G QSFP+ ports. You
can install the QSFP+ network cables in
Table 22 QSFP+ network cables available for the QSFP+ ports
QSFP+ network cable
LSWM1QSTK0
LSWM1QSTK1
LSWM1QSTK2
Figure 79 QSFP+ network cable
(1) Connector
NOTE:
• As a best practice, use H3C QSFP+ network cables for the QSFP+ ports on the switch.
• The H3C QSFP+ network cables available for the interface cards are subject to change over
time. For the most recent list of QSFP+ network cables, contact H3C Support or marketing staff.
For more information about H3C QSFP+ network cables, see H3C Transceiver Modules User Guide.

Combo interface

The S5130-30F-HI and S5130-34C-HI switches each provide eight combo interfaces. A combo
interface contains an SFP port and a 10/100/1000BASE-T autosensing Ethernet port. Only one of
these two ports can operate at a time.
Table 22 in the QSFP+ ports.
Max transmission distance
1 m (3.28 ft)
3 m (9.84 ft)
5 m (16.40 ft)
(2) Pull tab
75