Sfp+ Port - H3C S5130S-EI Series Installation Manual

FE SFP transceiver
module
SFP-FE-
LX-SM1
310-BIDI
SFP-FE-
LX-SM1
550-BIDI
NOTE:
• As a best practice, use H3C SFP transceiver modules and cables for the SFP ports.
• The H3C SFP transceiver modules and cables available for the SFP ports are subject to change
over time. For the most up-to-date list of H3C SFP transceiver modules and cables available for
the SFP ports, contact your H3C sales representative or technical support engineer.
• For the specifications of the H3C SFP transceiver modules and cables, see H3C Transceiver
Modules User Guide.

SFP+ port

To connect SFP+ ports over a long distance, use SFP/SFP+ transceiver modules and optical fibers.
To connect SFP+ ports over a short distance, use SFP+ cables. The SFP+ ports on the switch
support the following transceiver modules and cables:
•
GE SFP transceiver modules in Table4-8.
•
10-GE SFP+ transceiver modules in Table4-10.
•
10-GE SFP+ cables in Table4-11.
Table4-10 10-GE SFP+ transceiver modules available for the SFP+ ports
10-GE SFP+
transceiver
module
SFP-XG-SX-MM85
0-D
SFP-XG-SX-MM85
0-E
SFP-XG-SX-MM85
0 S
Central
wavelength
•
TX: 1310 nm
You must
•
use these
RX: 1550 nm
two
transceiver
•
TX: 1550 nm
modules in
•
RX: 1310 nm
pairs.
Central
wavelength
850 nm
850 nm
850 nm
Connector
LC
LC
Connector Fiber
50/125 µm
multi-mode
optical fiber
LC
62.5/125 µm
multi-mode
optical fiber
50/125 µm
multi-mode
optical fiber
LC
62.5/125 µm
multi-mode
optical fiber
LC 50/125 µm
l i d
4-54
Max
Fiber
transmission
distance
mode
9/125 µm, single
15 km (9.32 miles)
mode
Modal Max
bandwidth transmission
(MHz*km) distance
2000 300 m (984.3 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
200 33 m (108.27 ft)
160 26 m (85.30 ft)
2000 300 m (984.3 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
200 33 m (108.27 ft)
160 26 m (85.30 ft)
2000 300 m (984.3 ft)