H3C S5130S-EI Series Installation Manual page 100

Model
S5130S-10P-HPWR-EI
S5130S-28MP-HPWR-EI
S5130S-52P-EI
S5130S-52P-EI-M
S5130S-20P-PWR-EI
S5130S-28P-PWR-EI
S5130S-52P-PWR-EI
S5130S-52P-PWR-EI-AC
S5130S-12TP-EI
S5130S-12TP-HPWR-EI
S5130S-28TP-EI
S5130S-52TP-EI
S5130S-28PS-EI
S5130S-28P-HPWR-EI
S5130S-28S-HPWR-EI
S5130S-28F-EI
S5130S-52F-EI
SFP port support for SFP
transceiver modules and cables
•
SFP ports 9 and 10: GE SFP
transceiver module and cables in
Table4-8 and FE SFP transceiver
modules in Table4-9
•
SFP ports 11 and 12: GE SFP
transceiver module and cables in
Table4-8
•
SFP ports 25 and 26: GE SFP
transceiver module and cables in
Table4-8 and FE SFP transceiver
modules in Table4-9
•
SFP ports 27 and 28: GE SFP
transceiver module and cables in
Table4-8
•
SFP ports 49 and 50: GE SFP
transceiver module and cables in
Table4-8 and FE SFP transceiver
modules in Table4-9
•
SFP ports 51 and 52: GE SFP
transceiver module and cables in
Table4-8
GE SFP transceiver modules and
cables in Table4-8 and FE SFP
transceiver modules in Table4-9
GE SFP transceiver modules and
cables in Table4-8 and FE SFP
transceiver modules in Table4-9
4-50
Restrictions
N/A
To use GE transceiver modules
with a maximum transmission
distance greater than or equal to 80
km (49.71 miles), make sure the
ambient temperature does not
exceed 40°C (104°F).
To use transceiver modules with a
maximum transmission distance
greater than or equal to 80 km
(49.71 miles), make sure the
ambient temperature does not
exceed 40°C (104°F).
N/A
N/A
Make sure the ambient temperature
does not exceed 40°C (104°F)
when the following conditions are
met:
•
The switch uses one or two
PSR75-12A for power supply.
•
The switch uses transceiver
modules with a maximum
transmission distance greater
than or equal to 80 km (49.71
miles)