Seatpost Assembly - SRAM Rockshox Reverb AXS XPLR 2022 Service Manual

2 0 0 / 6 0 0 H o u r S e r v i c e
1
Align the brass keys with the lower post key slots. Ensure the laser Align the brass keys with the lower post key slots. Ensure the laser
etched RockShox logo on the lower post is aligned with the back of the etched RockShox logo on the lower post is aligned with the back of the
seatpost head. seatpost head.
Clamp the lower post into the Reverb Vise Blocks with the RockShox Clamp the lower post into the Reverb Vise Blocks with the RockShox
logo and key slots oriented upward. logo and key slots oriented upward.
Apply grease to the inside of the lower post the length of the key slots. Apply grease to the inside of the lower post the length of the key slots.
2 Insert the upper post into the lower post, lower bushing first. Insert the upper post into the lower post, lower bushing first.
Pinch the bushing and gently seat the lower bushing into the lower Pinch the bushing and gently seat the lower bushing into the lower
post by rocking and pressing down slightly until the bushing edges post by rocking and pressing down slightly until the bushing edges
clear the stepped edge inside the lower post. Stop when the bushing is clear the stepped edge inside the lower post. Stop when the bushing is
inserted and clears the inner post step. inserted and clears the inner post step.
During installation, ensure the lower bushing does not come out of
the upper post gland. The lower bushing can become permanently
damaged if dislodged during installation and must be replaced.
3 H H old each brass key in place and slide the upper post assembly down
and into the lower post until the brass keys engage the lower post key
slots.
Continue to push the upper post down into the lower post about half Continue to push the upper post down into the lower post about half
way. way.
S e a t p o s t A s s e m b l y
NOTI CE
Key slots
SRAM Butter Grease
35

Seatpost Assembly