7
Insert the poppet valve into the air shaft, through the air piston.
The poppet valve must be installed at this step. Failure to install the
poppet valve will cause permanent damage to the seatpost if it is
pressurized without the poppet valve installed.
Press the poppet valve into the air shaft until the top of the poppet
valve is approximately 10 mm from the air piston. The top of the poppet
valve should not contact the air piston.
To avoid a potential trapped internal air pocket during pressurization,
which can affect function, do not press the poppet valve fully into
the air piston.
8
Extend the seatpost to full extension/top out after the poppet valve is
installed.
NOTI CE
NOTI CE
40
Air Assembly Installation