SRAM Rockshox Reverb AXS XPLR 2022 Service Manual page 10

3 Hold the bicycle secure and unthread the collar/wiper seal assembly. Hold the bicycle secure and unthread the collar/wiper seal assembly.
Do not scratch the upper post with the wrench. Scratches can
damage the upper post outer surface, allow contaminants to enter
the lower tube, and degrade performance.
The bicycle frame seatpost clamp must be tight enough to prevent
the seatpost from spinning inside the frame. If the clamp is tightened
to the specified toque (do not exceed 6.7 N∙m / 59 in-lb) and the
seatpost moves when the seatpost collar/wiper seal assembly is
loosened or tightened, remove the seatpost and clamp it into a vise
with Reverb Vise Blocks.
Slide the collar/wiper seal assembly up. Slide the collar/wiper seal assembly up.
4 Clean the upper post below the collar/wiper seal assembly with a clean Clean the upper post below the collar/wiper seal assembly with a clean
lint-free shop towel. lint-free shop towel.
5 Apply a liberal amount of grease to the upper post below the collar/ Apply a liberal amount of grease to the upper post below the collar/
wiper seal assembly. wiper seal assembly.
NOTI CE
30 mm or adjustable wrench
SRAM Butter Grease
Collar/Wiper Seal Lubrication
10