SRAM Rockshox Reverb AXS XPLR 2022 Service Manual page 15

Table of Contents

Advertisement

4
Unthread and remove the air cap assembly.
Unthread and remove the air cap assembly.
⚠ WAR NING - EYE HA ZARD
Wear safety glasses and keep your eyes and face away from the
air valve. Keep your face and eyes away from the air valve when
deflating the seatpost.
Verify all air pressure is removed from the seatpost before
proceeding. Removal of the air cap assembly prior to
depressurization can cause the air cap assembly to separate from
the seatpost at high velocity during disassembly, and may cause
serious injury and damage to the seatpost.
Remove the air cap o-ring and discard it.
Remove the air cap o-ring and discard it.
Clean the air cap assembly.
Clean the air cap assembly.
5
Push the upper post assembly up until it stops.
Push the upper post assembly up until it stops.
Remove the bottom out o-ring and discard it.
Remove the bottom out o-ring and discard it.
24 mm
15
Seatpost Disassembly

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rockshox reverb axs sp-rvb-xplr-a1

Table of Contents