Rear Brake Lever Adjustment - Can-Am DS 70 Operator's Manual

vmr2008-106-010_a
1. Adjustment screws on lever
vmr2008-102-009_a
1. Adjustment screws on cables
Press brake lever.
Adjust cable link so it is parallel to ca-
ble support. Turn adjustment screws
on cable (not at lever) as required.
vmr2008-106-011_a
1. Cable link
2. Cable support
Using adjustment screws on lever, ad-
just cable free-play.
BRAKE CABLES ADJUSTMENT
Free-play
10 to 12 mm
(13/32 to 1/2 in)
_____________________
vmr2008-106-012_a
A. 10 and 12 mm (13/32 and 1/2 in)
Tighten all adjustment screw locks.
Rear Brake Lever
Adjustment
All Models except DS90 X
The normal free-play of at the end of
brake lever is between 15 and 25 mm
(19/32 and 1 in).
vmo2008-008-050_a
NORMAL FREE-PLAY
A. 15 to 25 mm (19/32 to 1 in)
To adjust rear brake lever, turn the
brake cable adjuster at the end of
brake cable until proper adjustment is
obtained.
vmo2008-008-049_a
1. Brake cable adjuster
117