Brake Pedal And Lever Adjustment; B.u.d.s. Programming; Entering Customer's Name (Buds); Resetting Trip Hours And Trip Distance (Buds) - Can-Am 2008 Outlander 400 EFI Shop Manual

ADJUSTMENTS
vmo2008-021-004_b
COMPRESSION - HIGH SPEED
1. Compression adjuster (17 mm wrench)
vmo2008-021-005_a
REBOUND
1. Rebound adjuster (flat screwdriver)
Brake Pedal and Lever
1. Ensure that brake pedal and brake lever (s) are
not spongy.

B.U.D.S. Programming

Connecting a PC to Vehicle
1. Connect the PC to vehicle. Refer to the latest
CAN-AM ATV B.U.D.S. SOFTWARE
edition of
AND COMMUNICATION TOOLS
er connecting procedure.
2. Ensure that the status bar shows the proper
protocol and the number 2 is displayed.
3. Press the READ DATA button from the tool bar
to initiate communication with the vehicle.
Entering Customer's Name
When starting the vehicle, the multifunc-
NOTE:
tion display will show the name of the customer;
for example: "HI JOHN SMITH". If the cus-
tomer's name is not programmed, only "HI" will
be visible when turning the vehicle ON.
1. Click on the VEHICLE tab to open the vehicle
information page.
20 / 34
sales@midwestmanuals.com
vbl2006-007-001
VEHICLE TAB
2. Type the name of the customer.
vbl2006-007-002
3. Click on WRITE DATA to save the information
in the vehicle's ECM.
NOTE:
B.U.D.S. automatically updates the Delivery Date
on the screen.
Resetting Trip Hours and Trip Distance
1. Ensure that the VEHICLE tab is selected.
for the prop-
2. Click on the RESET TRIP buttons to reset the
information.
2009-2
sales@midwestmanuals.com
After you are finished typing the name,
PREDELIVERY