Table of Contents
Advertisement
34
18
55
5
18
55
18
34
55
3
34
5
3
4
Step 5
Attach the Handlebar (5) onto the both Left/Right Upright Tubes (3, 4) with two Hexagon
Socket Pan Head Cap Bolts (18) and two Curve Washers (55). Tighten bolts with the Allen
Wrench with Phillips Screwdriver provided.
NOW PLEASE FULLY TIGHTEN ALL BOLTS AND LOCK KNOB
INSTALLED IN STEP 1 AND STEP 4 WITH THE ALLEN WRENCH WITH
PHILLIPS SCREWDRIVER PROVIDED.
Install two Handlebar Covers (34) onto the Handlebar (5).
Hardware:
(55) Curve Washer
(18) Hexagon Socket
2 PCS
Pan Head Cap Bolt
2 PCS
12
Advertisement
Table of Contents
