LifeGear 40160 Owner's Manual page 22

If the running belt begins to shift to the right, the user can stand on the Main Frame and hold
the handlebar with both hands. Then use your left foot to run on the left side of the running
belt. You should see the running belt start to correct itself by moving back towards the
center. However, if the running belt is still shifting to the right, use the S5 Allen Wrench
with Phillips Screwdriver provided and turn the right Hexagon Socket Cheese Head Cap Bolt
1/2 turn in a clockwise direction. Then try running on the center of the running belt again.
If the running belt is still shifting to the right, turn the right Hexagon Socket Cheese Head
Cap Bolt another 1/4 turn in the clockwise direction. Then try running on the center of the
running belt again. You should see the belt start to correct itself by moving back towards
the center. Repeat this procedure until the running belt is centered.
If the running belt is slipping during use, then use the S5 Allen Wrench with Phillips
Screwdriver provided and turn both left and right Hexagon Socket Cheese Head Cap Bolts
1/4 turn in the clockwise direction. You should now run on the running belt to determine if
the running belt is still slipping.
not slipping.
Repeating the above procedure until the running belt is
21
Tool:
S5 Allen Wrench with
Phillips Screwdriver
Tool:
S5 Allen Wrench with
Phillips Screwdriver