LifeGear 40160 Owner's Manual page 15

C.
Step 8
A. Insert the wires that come from the Computer (41) through into the hole on the plate of
the Handlebar (5).
B. Connect the Extension Sensor Wire I (17) and Hand Pulse Sensor Wires (26) from the
Handlebar (5) to the wires that come from the Computer (41).
C. Attach the Computer (41) onto the plate of the Handlebar (5) with two Cross Recessed
Pan Head Bolts (51) that were removed. Tighten bolts with the Allen Wrench with
Phillips Screwdriver provided.
Step 9
The running belt has been adjusted to the running deck at the factory before it was shipped.
At times the running belt may get slippery during shipment. After the treadmill is completely
assembled, use the Allen Wrench with Phillips Screwdriver provided to turn the both left and
right hexagon socket cheese head cap bolts 1/4 turn clockwise before using the treadmill.
41
5
41
51
5
41
51
41
17 26
17
Tool:
14
A.
5
B.
41
26
S5 Allen Wrench with
Phillips Screwdriver