Projecting Scenarios
Here, we will describe the method for playing a scenario sent to a memory card,
operations during scenario playback, and editing a scenario.
Playing a Scenario
The scenario was sent to a memory card by the scenario sending function in EMP
SlideMaker2.
Tip :
Autorun and continuous play can be set in the scenario.
1
Start the CardPlayer.
This displays the content of the inserted memory card.
2
Press the [ ], [ ], [ ], and [ ] buttons on the remote control to position
the cursor on the scenario folder that is to play.
3
Press the following buttons on the remote control depending on the
operation mode in use.
Guide mode
Quick mode
Downloaded from:
p.11
: Press the [Enter] button to display the Easy Menu. Press the
[ ] and [ ] buttons, then select "Play Scenario" and press
the [Enter] button.
: Press the [Enter] button.
http://www.usersmanualguide.com/
p.20
26
EasyMP Operation Guide
p.11
Scenario files